Henan Mikim Machinery Co., Ltd.
Henan Mikim Machinery Co., Ltd.
Add to Cart
Small N2 Nitrogen Gas Psa Nitrogen Generator For Food Packaging
Description
The PSA nitrogen generator uses air as the raw material, and uses a high-efficiency, high-selectivity solid adsorbent to selectively adsorb nitrogen and oxygen to separate nitrogen and oxygen in the air. The separation effect of carbon molecular sieve on nitrogen and oxygen is mainly based on the different diffusion rates of these two gases on the surface of carbon molecular sieve. The gas (oxygen) with smaller diameter diffuses faster and enters the solid phase of molecular sieve more. In this way, a nitrogen-enriched component can be obtained in the gas phase.
Parameter
|
NITROGEN PURITY |
PRODUCTION (Nm3/h) |
AIR CONSUMPTION ( Nm3/min) |
| 99.5% | 3 to 2500 | 0.25 to 115.62 |
| 97% | 10 to 2500 | 0.4 to 99.99 |
| 99% | 10 to 2500 | 0.45 to 101.52 |
| 99.9% | 3 to 1500 | 0.4 to 98 |
| 99.99% | 3 to 1000 | 0.5 to 91.30 |
| 99.999% | 3 to 300 | 0.78 to 49.32 |
Advantage
1. The nitrogen production cost of the PSA nitrogen generator is low. Using advanced technology, it only takes a few minutes to produce nitrogen, which is lower in cost and higher in efficiency than other equipment on the market.
2. The PSA nitrogen generator has reliable performance and is fully automatic control operation. It does not require special operators. The overall equipment is easy to operate, and the switch can be started for continuous gas supply.
3. The equipment is equipped with a nitrogen detection device, and the purity of nitrogen can be monitored in real time, so that the operator can see the working status of the equipment at a glance.
4. The equipment has strong pressure resistance and long service life, and needs to be placed in a ventilated place.
5. The parts of the equipment are made of high-quality materials, and the control valve can ensure the reliable operation of the nitrogen equipment.
